Coherent’s NoiseBlock™ 90/10 Beamsplitter Filters are designed to diffract 90% of the incoming light that matches the designed Bragg wavelength (λ0) and incident angle. All other wavelengths will be transmitted through the filter, making them excellent for boosting the effective signal of a Raman spectrometer.
Adding a NoiseBlock™ 90/10 beamsplitter filter to a Raman spectrometer with a wavelength stabilized laser source can increase the recovered Raman signal by almost a factor of 4 relative to a broadband 50/50 beamsplitter. The filter’s narrow spectral profile (HWHM <10cm-1) is designed to match the SureBlock™ Ultra Narrow-band Notch Filter and NoiseBlock™ ASE Suppression Filter , making it ideal for enabling Ultra-low Frequency (Low Wavenumber) Raman Spectroscopy with high signal-to-noise.
|Center Wavelength||405||488, 514.5, 532, 633, 785, 987||nm|
|Bandwidth (FWHM)1||0.03||<0.15||nm (FWHM)|
|Total Deflection Angle (2θ)||8-12||Degrees|
|Clear Aperture Diameter||9 mm in 1″ mount. Custom sizes available.||mm|
1Grating bandwidth is a function of wavelength and thickness
Please Read Before Continuing
Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.